good quality high pressure crimping machine

high pressure crimping machine Notice : 1. The machine should be installed on the level foundation of the workshop. 2. The installation and the adjustment& test are the manufacturer to run the machine with an empty load and carry out a pressing & connection test with the tube connection end. After have been confirmed that it meets the design requirement, it can be allowed to leave the factory. 3. For locking & pressing the different specification of the rubber tube, it should be changed to the different specification of the pressing header. 4. After a long period of the use, if a leakage oil phenomenon is found, it is necessary to change the seal parts in the ram and the pipe& valve system on time. 5. The hydraulic oil should use 46# resisting wear one in trademark Great Wall and the oil temperature should be controlled in 30 35degree. 6. For the pressing mechanism work condition, it is necessary to carry out a fixed period of maintenance to assure the equipment in a normal running.